6 mm-26 mm Dicet Ireng Warna Mandiri Ireng Rantai Pengangkat Baja Las Industri Rantai Sling Hoist Rantai Derek
6 mm-26 mm Dicet Ireng Warna Mandiri Ireng Rantai Pengangkat Baja Las Industri Rantai Sling Hoist Rantai Derek
Kategori
Ngangkat lan ngiket, rantai pengangkat,rantai pranala cendhak, pengangkatan rantai pranala bunder,Rantai Kelas T, rantai Kelas DAT,Rantai kelas DT, DIN EN 818-7rantai pranala cendhak kanggo tujuan ngangkat,rantai hoist toleransi alus,rantai baja paduan
Aplikasi
Ngangkat lan ngiket, ngangkat beban, ngiket beban
Gambar 1: rantai/sambungan hoist
Kunci
| 1 | Nglintasi garis tengah pranala | l | yaiku dawa nada kaping pirang-pirang |
| p | yaiku lapangan | dm | yaiku diameter materi sing diukur |
| ds | yaiku diameter las | e | Apa dawane dimensi sing dipengaruhi dening pengelasan? |
| w3 | yaiku jembar internal ing las | w2 | yaiku jembar njaba ing sadhuwure las |
Tabel 1: dimensi rantai/link hoist (mm)
| Nominal size dn | Material diametertolerance | Pitch | Wikaping | Gauge length of 11 x pn | Wsawah diameter ds max. | |||
|
pn |
tolerance1) | internal w3 min. | external w2 max. |
l |
tolerance1) | |||
| 4 | ± 0.2 | 12 | 0.25 | 4.8 | 13.6 | 132 | 0.6 | 4.3 |
| 5 | ± 0.2 | 15 | 0.3 | 6.0 | 17.0 | 165 | 0.8 | 5.4 |
| 6 | ± 0.2 | 18 | 0.35 | 7.2 | 20.4 | 198 | 1.0 | 6.5 |
| 7 | ± 0.3 | 21 | 0.4 | 8.4 | 23.8 | 231 | 1.1 | 7.6 |
| 8 | ± 0.3 | 24 | 0.5 | 9.6 | 27.2 | 264 | 1.3 | 8.6 |
| 9 | ± 0.4 | 27 | 0.5 | 10.8 | 30.6 | 297 | 1.4 | 9.7 |
| 10 | ± 0.4 | 30 | 0.6 | 12.0 | 34.0 | 330 | 1.6 | 10.8 |
| 11 | ± 0.4 | 33 | 0.6 | 13.2 | 37.4 | 363 | 1.7 | 11.9 |
| 12 | ± 0.5 | 36 | 0.7 | 14.4 | 40.8 | 396 | 1.9 | 13.0 |
| 13 | ± 0.5 | 39 | 0.8 | 15.6 | 44.2 | 429 | 2.1 | 14.0 |
| 14 | ± 0.6 | 42 | 0.8 | 16.8 | 47.6 | 462 | 2.2 | 15.1 |
| 16 | ± 0.6 | 48 | 0.9 | 19.2 | 54.4 | 528 | 2.5 | 17.3 |
| 18 | ± 0.9 | 54 | 1.0 | 21.6 | 61.2 | 594 | 2.9 | 19.4 |
| 20 | ± 1.0 | 60 | 1.2 | 24.0 | 68.0 | 660 | 3.2 | 21.6 |
| 22 | ± 1.1 | 66 | 1.3 | 26.4 | 74.8 | 726 | 3.5 | 23.8 |
| 1) These tolerances are usually divided into + 2/3 and – 1/3 for both the individual link and thestandard gauge length. | ||||||||
Tabel 2: watesan beban kerja rantai hoist (WLL)
| Nominal size dn mm | Chain type T t | Chain type DAT t | Chain type DT t |
| 4 5 6 | 0.5 0.8 1.1 | 0.4 0.63 0.9 | 0.25 0.4 0.56 |
| 7 8 9 | 1.5 2 2.5 | 1.2 1.6 2 | 0.75 1 1.25 |
| 10 11 12 | 3.2 3.8 4.5 | 2.5 3 3.6 | 1.6 1.9 2.2 |
| 13 14 16 | 5.3 6 8 | 4.2 5 6.3 | 2.6 3 4 |
| 18 20 22 | 10 12.5 15 | 8 10 12.5 | 5 6.3 7.5 |
| mean stress N/mm2 | 200 | 160 | 100 |
Tabel 3: gaya tahan produksi rantai hoist lan gaya putus
| Nominal size dn mm | Manufacturing proof force (MPF) kN ming. | Breaking force (BF) kN ming. |
| 4 | 12.6 | 20.1 |
| 5 | 19.6 | 31.4 |
| 6 | 28.3 | 45.2 |
| 7 | 38.5 | 61.6 |
| 8 | 50.3 | 80.4 |
| 9 | 63.6 | 102 |
| 10 | 78.5 | 126 |
| 11 | 95 | 152 |
| 12 | 113 | 181 |
| 13 | 133 | 212 |
| 14 | 154 | 246 |
| 16 | 201 | 322 |
| 18 | 254 | 407 |
| 20 | 314 | 503 |
| 22 | 380 | 608 |
Tabel 4: total elongasi ultimate lan kekerasan permukaan
|
| hoist chain types | ||
| T | DAT | DT | |
| Total pungkasanimate pemanjangann A%min | 10 | 10 | 5 |
| Surface hardina ikis min dn < 7 mm, HV 5 dn = 7 mm to 11 mm, HV 10 dn > 11 mm, HV 10 |
360 360 360 |
500 500 450 |
550 550 500 |
