G80 3mm lan 2mm Galvanized Lashing Chain High Tensile Alloy Steel Lifting Link Chain kanggo Electric Hoist
kategori
Ngangkat lan nggebug, rantai angkat,rantai link cendhak, ngangkat rantai link bunder,Rantai kelas T, rantai DAT kelas,Rantai DT kelas, DIN EN 818-7chain link cendhak kanggo tujuan ngangkat,rantai hoist toleransi sing apik,rantai baja paduan
Aplikasi
G80 3mm lan 2mm Galvanized Lashing Chain High Tensile Alloy Steel Lifting Link Chain kanggo Electric Hoist
Angkat lan lashing, ngangkat beban, ngiket beban
Gambar 1: rantai hoist / link
kunci
| 1 | Nglintasi garis tengah link | l | yaiku dawa pitch pirang-pirang |
| p | yaiku pitch | dm | yaiku diameter materi sing diukur |
| ds | punika diameteripun weld | e | yaiku dawa dimensi sing kena pengaruh welding |
| w3 | punika jembaré internal ing weld | w2 | punika jembaré njaba liwat weld |
Tabel 1: ukuran rantai hoist / link (mm)
| Nominal size dn | Material diametertolerance | Pitch | Width | Gauge length of 11 x pn | Weld diameter ds max. | |||
|
pn |
tolerance1) | internal w3 min. | external w2 max. |
l |
tolerance1) | |||
| 4 | ± 0.2 | 12 | 0.25 | 4.8 | 13.6 | 132 | 0.6 | 4.3 |
| 5 | ± 0.2 | 15 | 0.3 | 6.0 | 17.0 | 165 | 0.8 | 5.4 |
| 6 | ± 0.2 | 18 | 0.35 | 7.2 | 20.4 | 198 | 1.0 | 6.5 |
| 7 | ± 0.3 | 21 | 0.4 | 8.4 | 23.8 | 231 | 1.1 | 7.6 |
| 8 | ± 0.3 | 24 | 0.5 | 9.6 | 27.2 | 264 | 1.3 | 8.6 |
| 9 | ± 0.4 | 27 | 0.5 | 10.8 | 30.6 | 297 | 1.4 | 9.7 |
| 10 | ± 0.4 | 30 | 0.6 | 12.0 | 34.0 | 330 | 1.6 | 10.8 |
| 11 | ± 0.4 | 33 | 0.6 | 13.2 | 37.4 | 363 | 1.7 | 11.9 |
| 12 | ± 0.5 | 36 | 0.7 | 14.4 | 40.8 | 396 | 1.9 | 13.0 |
| 13 | ± 0.5 | 39 | 0.8 | 15.6 | 44.2 | 429 | 2.1 | 14.0 |
| 14 | ± 0.6 | 42 | 0.8 | 16.8 | 47.6 | 462 | 2.2 | 15.1 |
| 16 | ± 0.6 | 48 | 0.9 | 19.2 | 54.4 | 528 | 2.5 | 17.3 |
| 18 | ± 0.9 | 54 | 1.0 | 21.6 | 61.2 | 594 | 2.9 | 19.4 |
| 20 | ± 1.0 | 60 | 1.2 | 24.0 | 68.0 | 660 | 3.2 | 21.6 |
| 22 | ± 1.1 | 66 | 1.3 | 26.4 | 74.8 | 726 | 3.5 | 23.8 |
| 1) These tolerances are usually divided into + 2/3 and – 1/3 for both the individual link and thestandard gauge length. | ||||||||
Tabel 2: Batas beban kerja rantai kerekan (WLL)
| Nominal size dn mm | Chain type T t | Chain type DAT t | Chain type DT t |
| 4 5 6 | 0.5 0.8 1.1 | 0.4 0.63 0.9 | 0.25 0.4 0.56 |
| 7 8 9 | 1.5 2 2.5 | 1.2 1.6 2 | 0.75 1 1.25 |
| 10 11 12 | 3.2 3.8 4.5 | 2.5 3 3.6 | 1.6 1.9 2.2 |
| 13 14 16 | 5.3 6 8 | 4.2 5 6.3 | 2.6 3 4 |
| 18 20 22 | 10 12.5 15 | 8 10 12.5 | 5 6.3 7.5 |
| mean stress N/mm2 | 200 | 160 | 100 |
Tabel 3: pasukan bukti manufaktur chain hoist lan pasukan break
| Nominal size dn mm | Manufacturing proof force (MPF) kN ming. | Breaking force (BF) kN ming. |
| 4 | 12.6 | 20.1 |
| 5 | 19.6 | 31.4 |
| 6 | 28.3 | 45.2 |
| 7 | 38.5 | 61.6 |
| 8 | 50.3 | 80.4 |
| 9 | 63.6 | 102 |
| 10 | 78.5 | 126 |
| 11 | 95 | 152 |
| 12 | 113 | 181 |
| 13 | 133 | 212 |
| 14 | 154 | 246 |
| 16 | 201 | 322 |
| 18 | 254 | 407 |
| 20 | 314 | 503 |
| 22 | 380 | 608 |
Tabel 4: total elongation pungkasan lan atose lumahing
|
| hoist chain types | ||
| T | DAT | DT | |
| Total ultimate elongasin A%min | 10 | 10 | 5 |
| Surface hardness min dn < 7 mm, HV 5 dn = 7 mm to 11 mm, HV 10 dn > 11 mm, HV 10 |
360 360 360 |
500 500 450 |
550 550 500 |
